| |
 Jammers > Details MJ-200L(A)
MJ-200L
Jams all cellular phone signals: GSM 925-965 MHz, DCS 1800-1950, CDMA 860-885 MHz, PHS 1800-1950. All the specified mobil phones signals will be simultaneously disconnected.
The effective range area is about 50-100 Mt.
The signal must be < -80db in the location.
Total output power: Hi 24W (800:8W, 900:8W, 1800-1950:8W).
Total output power: Low 12W (800:4W, 900:4W, 1800-1950:4 W).
Technical Specification
- TX frequency: (CDMA) 860 ~ 885 MHz, (GSM) 925 ~ 965 MHz, (DCS.PHS) 1800 ~ 1950 MHz
- Total output power: Hi 24W ( 800:8W, 900:8 W, 1800-1950:8W ), Low 12W (800:4W, 900:4W, 1800-1950:4 W)
- Automatic switching power supply: 50/60Hz/AC 100 ~ 240V transmitting to DC 24V
- Dimension: 310mm(L)×186mm(W)×53mm(H)
- Weight: 2.0 Kg
- Jamming range: Radius 50 ~ 100 M ( the signal must be < -80db in the location)
- Safety Regulation: AC Adapter UL (E190582), CSA (LR112971 Level 3)
MJ-200La
MOBILE PHONE IMMOBILIZE SYSTEM
Jams all cellular phone signals: GSM 925-965 MHz, DCS 1800-1950, CDMA 860-885 MHz, PHS 1800-1950, 3G 2100-2200 MHz (Option for mod. MJ-200LA).
All the specified mobile phones signals will be simultaneously disconnected.
The effective range area is about 50-100 Mt.
The signal must be < -80db in the location.
Total output power: Hi 24W (800:8W, 900:8W, 1800-1950:8W).
Total output power: Low 12W (800:4W, 900:4W, 1800-1950:4 W).
Total output power 3G: Hi 32W (800:8W, 900:8W, 1800-1950:8W, 2100 -2200:8W) and 3G Low: 16 W (800:4W, 900:4W, 1800-1950:4W, 2100-2200:4W)
Technical Specification
- TX frequency:
TX frequency 851/869 ~ 894 MHz
TX frequency 925/936 ~ 965 MHz
TX frequency 1800 ~ 1990 MHz
TX frequency 2110 ~ 2170 MHz
- Total output power: Hi 24 W (800: 8W, 900: 8W, 1800-1950: 8W)
Low 12 W (800: 4W, 900: 4W, 1800-1950: 4W)
- Total output power include: Option 3G :Hi 32W (800: 8W, 900:8W ,1800-1950: 8W ,2100-2200:8W ) Low 16W (800: 4W, 900:4W ,1800-1950:4W ,2100-2200:4W)
- Automatic switching power supply: 50/60Hz/AC 100 ~ 240V transmitting to DC 24V
- Cover interface standards: AMPS,N-AMPS, NMT,TACS,GSM,CDMA,TDMA,IDEN,
UMTS,3G
- VSWR over protection for each modular
- Two fans of convection and add metal filter
- Option for RS-485 protocol
- ID switch
- TNC antenna connecter
- IR Remote Control (8-10 M)
- Designed to cut off wave only in the down-link band width, Therefore it doesn’t affect any Interference to base station and repeater
- Dimension: 345mm(L)×187mm(W)×58mm(H)
- Weight: 2.5 Kg (Not include antenna)
- RF output indicating of LED display
- Jamming range: Radius 50 ~ 100 M up [the signal must < -80db in the location]
- Safety Regulation: AC Adapter UL (E190582), CSA (LR112971 Level 3)
- Operating temperature: -10℃ ~ +60℃
- Humidity: 5% ~ 80%
|
art. code.: MJ-200L
Click to enlarge
art. code.: MJ-200La
|
Installation
- Take the Breaker out of the packing box.
- Plug in the antenna according to the frequencies (color)
- Plug in the AC power and then plug in DC jack to the Jammer
- When the LED are on, four bands of the Jammer are activated
Important notice
- Before turn on the power, please make sure all antennas are correctly plug-in
- The antennas have to plug in according to the frequency to the right connector to prevent short circuit
Adjust High / Low power of each band
- Step 1 Find the sliver sticker on the bottom of the device
- Step 2 Open the sticker
- Step 3 According to the demand to switch high / low of each band
|
LAW ENFORCEMENT ONLY (on demand)
Endoacustica has in a short span become synonymous with the production and distribution of hi-tech, state-of-the-art surveillance systems, both for professional as well as amateur use. Our impressive range of products includes: 24w-32w high power jammer, mobile phone jammers, radio frequency blockers, cell phone jammer, jammer, jammers, cellular breaker, cellular phone breakers, radio frequency jammer, mobile phone detector, gsm jammer, jammer gsm, cell phone zapper, cell phone blocker, audio jammer, video jammer, GPS jammer, wave deactivator, wave shield.
|
Buy or Ask Informations about this product:
|
|
|
