When device is turned off, press the ON button and hold it pressed, the yellow light goes on and device enters standby mode.
When device is in standby mode, press the function key and hold it for 2 seconds; the yellow light will flash. Click button again to stop video recording, to save video files and return to standby mode, and yellow light will stay on.
When in standby mode, press the function key once; the yellow light will flash and enable you to take pictures. After you have finished, the yellow light will turn off and the device will return to standby mode.
In standby mode, press function key and keep it pressed for 4 seconds; the lights will switch off, and the device will shut down.
If the battery is low, the yellow light will flash for 5 times after shutdown; in any case, the last video file will be saved before shutdown.
Connect the device to a computer or power adapter for charging, the yellow light will flash when charging and will stay on when battery is completely charged.
When you have finished taking your video or shooting your pictures, you can use the USB data cable to connect the device to a computer, and your images and videos can easily be copied or cut/pasted on your computer.
Note: do not record videos or take pictures when the device is connected to a computer.
This product is a typical example of our of advanced MINI DV products, produced to meet market demand for this kind of devices.
It features several functions: high-quality digital video, image capture, audio recording and portable files storage.
With its small size and stylish look, it is easy to carry and to operate, and will not raise any unnecessary suspicion.
In the unlikely case that the device should stop responding, all you need to do is reset it.
Note: when you reset the device, its power will go off, and any unsaved files will be lost.
Make sure that your computer is showing the correct time, and connect the device with the computer. In your “My Computer” section, just locate the recorder which will be recognized as a USB flash drive, and run the Update Time tool.
The device will now be set to the same time as your computer.
- Resolution: 1.3M CMOS
- Visual Angle: 65 degrees
- Minimum Illumination: 1Lux
- Storage Temperature: -20°C -80°C
- Operation Temperature: -10°C -50°C
- Operation Humidity: 15-85%RH
- Memory Capacity: Supports up to 8Gb
- Video: JPEG, AVI format VGA (640*480, 30 f/s)
- Pictures: JPEG, JPG format (1280*960)
- USB Interface: USB 1.1/2.0
- Operating Systems Supported: 2000/XP/VISTA32