UHF STETHOSCOPE TRANSMITTER

crystal controlled stethoscope audio transmitter

Can be collocated upon window glass!!

Singular crystal controlled stethoscope audio transmitter for audio monitoring through wall, ceiling, window glasses etc. Designed in a cylindrical case with flexible external antenna and built-in power supply frame, the transmitter allows remote control via radio frequency. In order to obtain better qualitative sound it is recommended the use of our special WFM scanning receiver IC-ERRE.

The product is powered from one lithium 3V cell CR2450 and starts operating as soon as the battery is installed into power supply frame with its positive pole up. Sensor unit of the product is built on the basis of high-sensitive piezoceramic.

General characteristics:

Small dimensions
Independent power supply
High-sensitive piezo-ceramic converter

The package includes:

Stethoscope audio transmitter
CR 2450 3V cell.
Installation kit.

Crystal controlled stethoscope audio transmitter
Stethoscope audio transmitter UHF-STE with 3V cell

art. code: UHF-STE

Specification:
Image resolution	Record 320x240 MPEG-4
LCD Monitor	2.36" TFT LCD
Video Playback	MPEG-4 encode and decode, resolution up to 640X360 pixel (30 fps/sec - digital zoom)
Photo view	JPEG format (up to 640X360 no image resolution loss)
Wired A/V Input	Composite A/V Input x 2 (4PIN Connector)
Wireless A/V Input	Composite A/V Input x 1 (4PIN Connector)
Frequency	2413 MHz, 2432 MHz, 2451 MHz, 2470 MHz
Audio sub carrier	5.5 MHz
Audio Video Output	Composite A/V Input x 1 (phone jack 3.5 mm)
Display	2.36" TFT LCD
Video format	NTSC/PAL
Status indicator	LED x 3: power (orange), record (red), capture (yellow)
Power source	Internal rechargeable Li-Ion battery, AC Charger/Adapter
Power consumption	400mA
Dimension and weight	123x75x27 mm; 250 g
Operation temperature	-10°C + 55°C
IR remote	30 degree, 10 meters (38KHz carrier/3.3V)

UHF STETHOSCOPE TRANSMITTER

crystal controlled stethoscope audio transmitter

Buy or Ask Informations about this product: