AVR

Micro Digital Audio and Video Recorder with Compact Flash memory card with capacity from 128 Megabyte to 2 Gigabyte and recording time of up to 3 hrs. of medium quality video on 1 Gigabyte Compact Flash.

Technical Characteristics:

• Video inputs/Audio inputs: 1 / 1
• Alarm inputs: 1
• Compact Flash card capacity: 128MB- 2GB
• Average recording time: 3 hrs. on 1 GB CF card
• Power supply: Built-in Li-Pol battery
• Battery life: recording - 6 hrs.; stand-by - 1 year
• Dimensions : 65x54x15 mm.
• Weight: 75 g.

Power converter for AVR

The voltage converter for video camera (further referred to as the unit) is designed to be connected to AVR video recorders. The unit is a voltage converter, which allows the video camera to be powered from the AVR power source, and generates voltage of 12 V (200 mA) on its output. The output has a connector for the video camera. Besides, the unit includes an input connector which completely replicates the one on the video recorder, and makes it possible to use an external microphone and remote control. Therefore, the user may have a stand-alone system to record video and audio without using any additional power supply units for the video camera.

Connecting the Power converter for AVR

With the unit connected, the AVR cannot be recharged during recording, as the battery discharges faster than the unit charges from the charging unit when the video camera operates. The charging unit, supplied with the AVR, switches off under these conditions. One should remember, that any external units connected to the AVR, consume additional energy from the battery. Thus, it is strongly recommended to switch off external units from the AVR in order to avoid excessive battery discharging and its failure. It is not recommended to use video cameras with useful current consumption exceeding 200 mA, as it may cause premature battery failure. To prepare the unit for operation connect the OUT cable to the AVR connector, then connect the video camera output to the IN connector (the cable from the AVR delivery set or Remote control+external microphone accessory can be used for this purpose), and connect the 12 V cable to the video camera supply connector. Now recording can be made. To record you should follow the video recorder manual. To decrease energy consumption from the AVR battery, the video camera is supplied only at recording on. All other time the converter is switched off (and the video camera is not supplied). We should remind once again, that it is necessary to disconnect all the external units from the video recorder in pauses in recording, and to charge the battery in time as well.

Specifications:

• Peak load current: 200 mA;
• DC output voltage: 12V +/-10%;
• Input connector basing completely coincides with the same connector on the AVR;

Integrated external microphone with compressor + remote control unit for AVR

This optional device is intended for use with the audio video recorders AVR. The device is external microphone with compressor integrated with remote control and video input. External microphone smoothes sound level when recording is carried out from sound sources at close and distant range. Thus this enables to avoid overload when recording is realized at close distance and amplify the signal at distant ranges. Flexible cable enables to arrange the microphone at the suitable-to-record place and remote control unit simplifies recording process.

Car charger for AVR

The car battery charger for the AVR (herein after referred to as the unit) is designed for connection of the AVR video recorder to the car on-board power supply system. It is a charging unit, which can be charged from the car on-board power supply system (or another external DC power supply unit) of 7-28V. The unit provides complete AVR battery charge within 5-6 hours or its recharge during recording. The unit includes two LEDs to indicate the charging process and a cable to be connected to the power supply. Besides, it has a USB mini-B connector, which fully replicates that on the video recorder and enables various AVR accessories (e.g. an external microphone and remote control) to be used with the unit.

Specifications:

• Charging time for completely discharged battery of 1750mA*hr: 5-6hr;
• Supply voltage: 7-28V;
• Maximum current consumption during the battery charge: 250mA;