Endoacustica offers, Exclusive Customer Service and free Training

JM-6A six-antenna desktop jammer
JM-6A · Six-antenna desktop jammer

JM-6A · Desktop jammer

Six-Antenna Desktop Jammer for Cellular and Wi-Fi Signals

Six channels. Independent power control. The JM-6A brings configurable cellular and wireless coverage to a compact desktop unit built for continuous operation.

  • Independent on/off and power controls for each channel.
  • 15 W total RF output.
  • Mains-powered operation with forced-air cooling.
  • Designed to run 24 hours a day.

Product code: JM-6A

Contact Us for Pricing

Tell us where you plan to use the unit and which frequency bands you need.

Free consultation, training and support.
Speak to our team: +39 080 302 6530

For law enforcement only, on request.
Check the regulations applicable in your territory before requesting information.

Product overview

Six Channels. Control Where You Need It.

01 / CONTROL

Adjust Each Channel

Set output power by band and switch individual channels on or off independently.

02 / CONFIGURATION

Specify Your Frequencies

Tell us which bands you need when ordering. Coverage depends on the six-channel configuration selected.

03 / CONTINUOUS USE

Built for Extended Operation

A metal chassis and forced-air cooling support 24-hour operation on mains power.

Product details

Full description

Cellular and Wireless Signal Control

The JM-6A is a six-antenna desktop jammer for devices operating within its configured frequency bands. Available configurations are described for 2G, 3G, 4G, and 2.4 GHz Wi-Fi applications, including cellular listening devices and UMTS audio/video transmitters.

Each channel has independent on/off and output-power controls. Specify your required frequencies when ordering so the team can confirm coverage. The Wi-Fi/Bluetooth band is listed in the specifications below.

Desktop Hardware for Around-the-Clock Use

The metal chassis dissipates heat, while forced-air ventilation supports continuous, mains-powered operation. The unit is supplied ready to use in the selected configuration.

Total RF output is 15 W, with 75 W electrical consumption. The specified range is up to 25 meters; actual coverage depends on signal strength and local conditions. The enclosure measures 32 × 11.5 × 5.5 cm and weighs 1.75 kg.

Technical specifications

General specifications
Channels / antennas6 / 6
Total RF output15 W
Electrical consumption75 W
Operating rangeUp to 25 meters; actual coverage varies with local conditions
Power supplyMains power
OperationDesigned for continuous 24-hour use
ControlsIndependent on/off and adjustable power per channel
Cooling / housingForced-air ventilation / metal chassis
Dimensions32 × 11.5 × 5.5 cm
Weight1.75 kg
Frequency configuration
ChannelSignalFrequency (MHz)
1CDMA825–845 / 870–890
2GSM900890–915 / 935–960
3GSM18001710–1785 / 1805–1880
4WCDMA1920–1980 / 2110–2170
5Wi-Fi / Bluetooth2400–2483.5 (Bluetooth channels: 2402–2480)
6LTE FDD2500–2570 / 2620–2690

Frequencies can be configured when ordering. The six-channel configuration determines actual coverage.

Additional signal types listed in the source

LTE700, LTE800, LTE2300, LTE2600, CDMA800, CDMA850, GSM900, GSM1800, WCDMA, 2.4 GHz Wi-Fi, and PHS1900. The source also lists “CDMA200” and “3G CDMA200,” which require clarification. This list describes configuration options and does not establish simultaneous coverage of every listed network.

Usage and restrictions

For Authorized Agencies

For use by authorized government agencies and law enforcement in the course of their official duties.

Sales and use are subject to local restrictions. Confirm the requirements in your jurisdiction before requesting product information.

Expert Support, Included

Before You Buy

Talk with our team about your requirements and available configurations.

After Your Purchase

Get help learning the equipment and answers to your product questions.

Technical support

Work directly with the Endoacustica team for technical assistance.

Contact our team

Request a JM-6A Quote

Share your agency’s requirements. We’ll help confirm the configuration and provide pricing.

Or call: +39 080 302 6530