IC-ERRE · Handheld scanner receiver

Handheld wideband scanner receiver

IC-ERRE covers 100 kHz–1,309.995 MHz in AM, FM and WFM. This handheld scanner receiver combines 30-channel-per-second scanning, CTCSS/DTCS decoding and bank-organized memory with AA battery or external DC operation.

Wideband reception from 100 kHz to 1,309.995 MHz.
1,300 general memories organized into 22 banks.
CTCSS/DTCS recognition and decoding.
Built-in ferrite antenna for medium-wave AM reception.
3.5 mm audio output and a 50-ohm SMA antenna connection.

Product code: IC-ERRE

Price on request

Specify the frequencies and signal types you need to receive.

Technical consultation, training and support.
+39 080 302 6530

Wideband reception with flexible scanning

AM, FM and WFM

Receive compatible signals across a 100 kHz–1,309.995 MHz range, with thirteen selectable tuning steps.

Organized channel monitoring

Scan at 30 channels per second using memory banks, automatic storage, channel skip and priority monitoring.

Battery or external power

Operate from two AA batteries or an external DC supply. Suitable Ni-Cd batteries can be charged through the DC jack with the designated charger.

Full description

AM/FM/WFM reception in a compact receiver

IC-ERRE is a handheld scanner receiver covering 100 kHz–1,309.995 MHz. Its built-in ferrite antenna supports medium-wave AM reception without an external antenna. A 50-ohm SMA connector provides the external antenna connection for other reception requirements.

The compact, shock-resistant housing includes a dedicated keypad and 3.5 mm audio output. Power is supplied by two AA batteries or an external DC source. With the designated charger, the DC jack supports receiver operation while charging suitable Ni-Cd batteries. Charging applies only to compatible rechargeable cells.

Memory scanning and selective audio

Channels can be assigned six-character alphanumeric names. Built-in CTCSS/DTCS decoding keeps the audio muted until the programmed tone or code is detected, helping select the intended signal when other radio traffic is present.

Scanning operates at 30 channels per second. Modes include full scan, band scan, automatic storage and auto-write, memory-bank scan, channel skip, priority-channel scan and tone scan. Squelch controls provide automatic delay adjustment, plus threshold and hysteresis adjustment based on signal strength.

Supplied accessories: antenna, belt clip and wrist strap.

Technical specifications

Reception and scanning
Receive frequency range	0.1000–1,309.9950 MHz
Demodulation modes	AM / FM / WFM
Tuning steps	5 / 6.25 / 8.333 / 9 / 10 / 12.5 / 15 / 20 / 25 / 30 / 50 / 100 / 200 kHz
AM selectivity	> 15 kHz at −6 dB; < 30 kHz at −60 dB
FM selectivity	> 15 kHz at −6 dB; < 30 kHz at −60 dB
WFM selectivity	> 150 kHz at −6 dB
General memories	1,300 locations in 22 banks
Auto-write memories	200 locations
Scan band limits	50
Priority channel	1
Channel names	6-character alphanumeric
Scan speed	30 channels/s
Scan modes	Full, band, automatic storage and auto-write, memory bank, skip, priority, tone

Audio, power and accessories
CTCSS / DTCS	Recognition and decoding
Squelch	Automatic delay; adjustable threshold and hysteresis
Frequency display resolution	1 kHz
Antenna connector	SMA, 50 Ω
Internal antenna	Ferrite antenna for medium-wave AM reception
Battery power	2 × AA, 2.4–3 V
External power	4.5–6.3 V DC; nominal 4.5 V
Charging	Suitable Ni-Cd batteries via DC jack with designated charger
Active current draw	130 mA
Squelched current draw	65 mA with battery saver off; 30 mA with battery saver on
Audio output power	150 mW into 16 Ω; 80 mW into an external 8 Ω load
Audio connector	3.5 mm jack
Supplied accessories	Antenna, belt clip, wrist strap

Applications

Multiband radio monitoring

Receive compatible AM, FM and WFM signals across the specified range. The internal ferrite antenna supports medium-wave AM listening without an external antenna.

Stored-channel monitoring

Organize selected frequencies into banks and identify them with alphanumeric names. Priority scanning follows the designated priority channel, while skip settings exclude unwanted channels.

Tone-selective reception

CTCSS/DTCS decoding opens the audio when the programmed tone or code is detected. The 3.5 mm output provides a connection for compatible external audio equipment.

Technical support

Receiver selection

Review the frequencies and receive modes required for your application before ordering.

Setup and training

Guidance on memory banks, squelch settings and scan modes.

After-sales assistance

Technical support for configuration and operating questions after delivery.

Talk to our team

Specify your reception requirements

Tell us which frequencies and receive modes you need. Our team can help assess IC-ERRE for your application and provide a quote.

Or call us: +39 080 302 6530