Endoacustica offers, Exclusive Customer Service and free Training
EAGLE · Directional microphone
Professional parabolic microphone for long-range listening
EAGLE combines a 60 cm parabolic dish, microphone, preamp and headphones for directional listening at a distance. The system provides up to +66 dB of gain, high-pass filtering and a line output for external recording, with a stated listening range of up to 150–200 m (approximately 490–660 ft), depending on conditions.
- 60 cm (23.6 in) dish with two side handles.
- Up to +66 dB gain in 11 discrete steps.
- Microphone and preamp high-pass filters.
- Headphone monitoring and line output.
- Handheld use or tripod mounting with a ¼-inch fitting.
Product code: EAGLE
Price on request
Specify your listening distance and recording equipment.
Technical consultation, training and support.
+39 080 302 6530
Parabolic pickup with independent audio controls
60 cm reflector
The dish concentrates incoming sound at the microphone positioned at its focal point.
Adjustable preamp
Up to +66 dB gain, selectable high-pass filtering and a peak limiter provide control over the audio signal.
Handheld or tripod-mounted
Side handles support manual aiming. A ¼-inch mount allows a fixed listening position on a tripod.
Full description
Long-range conversation monitoring
EAGLE is a complete parabolic listening system built around a 60 cm reflector, a dedicated microphone, a preamp and headphones. It supports real-time monitoring of speech and other sounds while the operator remains at a separate listening position.
The stated range is up to 150–200 m, or approximately 490–660 ft. Source level, background noise, wind and weather affect intelligibility at those distances. Precise aiming is an essential part of setting up the listening position.
Acoustic concentration and field handling
The reflector collects incoming sound and focuses it onto the microphone. This acoustic concentration favors sound arriving from the direction in which the dish is aimed, helping distinguish the selected source from off-axis sound.
The permanently polarized condenser capsule covers 20 Hz–20 kHz and incorporates an 80 Hz high-pass filter. A windscreen is provided. Two side handles allow the operator to reposition the dish by hand, while the ¼-inch mounting plate supports tripod use for sustained monitoring.
Gain control, filtering and peak limiting
The preamp offers up to +66 dB of gain in 11 discrete steps, a 10 Hz–50 kHz frequency response and dynamic range exceeding 120 dB. RF interference resistance and a peak limiter using two optical isolators help manage signal disturbances and peaks.
In addition to the microphone filter, the preamp provides a selectable 80 or 160 Hz high-pass filter with a 6 dB-per-octave slope. These controls reduce low-frequency components that interfere with the desired audio; they do not remove all background sound.
Monitoring, recording and separate power supplies
Headphone and line outputs support live listening and external recording. Options include the DIGICELL recorder and other compact audio recorders. Input levels and connections should be matched to the selected recording setup.
The microphone operates on phantom power or a 1.5 V alkaline battery, with up to 1,200 hours of microphone runtime under ideal conditions. Actual runtime varies with use and battery condition. The preamp has a separate supply: two internal AA batteries or 5–17 V DC external power. Its aluminum enclosure includes a belt clip.
Technical specifications
| Dish diameter | 60 cm (23.6 in) |
|---|---|
| Listed dish weight | Approximately 3 kg (6.6 lb) |
| Listening range | Up to 150–200 m (approximately 490–660 ft), depending on conditions |
| Support | Handheld with two side handles or tripod-mounted |
| Tripod fitting | ¼ inch |
| Microphone capsule | Permanently polarized condenser |
| Listed polar pattern | Line + gradient |
| Microphone frequency response | 20 Hz–20 kHz |
| Signal-to-noise ratio | 77 dB at 1 kHz, 1 Pa |
| Dynamic range with phantom power | 112 dB at 1 kHz, maximum SPL |
| Microphone high-pass filter | 80 Hz; 12 dB/octave |
| Phantom power | 11–52 V DC; typical current 2 mA |
| Microphone battery | 1.5 V alkaline |
| Typical battery current | 0.4 mA |
| Microphone battery runtime | Up to 1,200 hours under ideal conditions with an alkaline battery. Actual runtime varies with use and battery condition. |
| Microphone accessory | Windscreen |
| Preamp gain | Up to +66 dB in 11 discrete steps |
|---|---|
| Preamp dynamic range | Exceeds 120 dB |
| Preamp frequency response | 10 Hz–50 kHz |
| Preamp high-pass filter | 80 or 160 Hz; 6 dB/octave |
| Outputs | Headphone and line |
| Inputs | Microphone and line; balanced and unbalanced |
| Monitor gain control | Separate from headphone gain |
| Peak limiter | Uses two optical isolators |
| RF protection | Resistance to RF interference |
| Preamp batteries | Two internal AA batteries |
| External preamp power | 5–17 V DC |
| Preamp enclosure | Aluminum with belt clip |
| System components | Dish, microphone, preamp and headphones |
| Recorder | External, optional |
Applications
Investigative listening
Monitor conversations from a distant position. Handheld aiming follows the source, while tripod mounting maintains orientation during longer sessions.
Broadcast, film and sports
Capture dialogue or sound from a selected part of a scene or playing field. The line output feeds an external recording device.
Wildlife observation
Listen to animal calls without approaching the source. Headphones, a windscreen and high-pass filters support outdoor audio capture.
Technical consultation and support
System selection
Describe the sound source, listening distance and environment so our team can assess the setup.
Recorder matching
Review input levels and connections for the recording equipment you plan to use.
Setup and training
Get guidance on microphone positioning, gain adjustment and power options.
Discuss your requirements
Specify your directional listening kit
Tell us about the environment, listening distance and recorder you plan to use. We can help select the configuration and power option for your application.
Or call us: +39 080 302 6530




